10" slanted legs

Our 10" slanted legs are perfect for coffee tables, end tables, cabinets, vanities, dressers, etc. These are made in small batches right here in Greenwood, Indiana using only the finest Indiana hardwoods. 

This is a set of 4 legs.

Available in two wood species:  White Oak and Mahogany

Two finish options:
1.  unfinished (ready for your stain or finish)

2.  finished with two coats of Minwax polyurethane. Polyurethane is a clear finish that will bring out the natural color of the wood and give a satin sheen. If you need to match the color to an existing piece, choose the unfinished option. You will be able to test stain samples on the top side of the legs. 

Each leg easily attaches with two screws (included). Because the legs are angled on two sides, each set will include two "left" legs and two "right" legs. A set of 4 legs is rated to hold up to 200 pounds, which makes them strong enough for most pieces of furniture. They are not designed to be used on couches or chairs. Installing the legs at a slight angle to one another will increase rigidity. 
Watch a detailed installation video on Youtube:
https://youtu.be/CVLxZVyQRGs?si=WgzF_NuLoaQREOXh

Shipping is FREE to the lower 48 states! 

Each set includes: 

2- Right legs

2- Left legs

8- screws

1- T20 Torx bit