Leg Kit for Ikea Kallax, horizontal or vertical

These sets contain special versions of our "10° Legs". We have modified them specifically to work with the Ikea Kallax bookshelf system. The modifications include deeper screw holes and longer hardware to ensure a strong connection. You can watch a detailed installation video below ↓

1.   Select the orientation that your Kallax will be installed in: Horizontal or Vertical.  Please reference the pictures for illustration. The orientation of your Kallax will dictate the specific kit required.

       2. Choose the number of center supports your Kallax will need. The same legs can be               used as center supports by simply rotating them so that the horizontal part of the               leg is pointing to the rear of the Kallax. The following is a guideline, but you may                 want to add additional supports if you are storing heavy items:             

           Two compartments wide: set of 4 legs 
           Three compartments wide: set of 4 legs  (supports optional)
           Four compartments wide- Set of 4 legs plus one center support
           Five compartments wide- Set of 4 legs plus two center supports 

      3. Choose the wood type. We offer these kits in White Oak, Mahogany, Maple and                  Walnut. We apply a clear polyurethane to bring out the natural color of the wood                and give it protection. The pictures are a good representation of each wood                        color, but please keep in mind wood can vary slightly in tone and grain pattern.

You will receive:

*4 legs (plus the number of center supports you selected)

*Screws for installation

*one driver bit

You will need:

A drill and a 3/32" drill bit for drilling the pilot holes.

Dimensions:

Height= 6"       Width= 6"     Thickness= 1.5"